2019 Blue Wave 2300 Pure Bay #69H2018-12-14T15:51:13+00:00

Powered With a DF200APXW2 White Suzuki Outboard Motor! This Beauty Comes With A “4 – 6” Wet Sound Hard Top Speakers (No Head Unit),  Tall PB Console, Suzuki Digital Pre-Rig 1-Square Gauge, Beige w/ Beige Accent Upholstery Package w/ Welded    Backrest, 2300 PB White Powder Coat Package,  70 Alum Leaning Post w/ Welded Backrest, Factory Hard Top – White PC – White Top & Light Blue Underneath,  10″ Seastar Hydraulic Jackplate, Graphite Formed Glovebox w/ Cupholders By Rear Jumpseats,  LED Rubrail Navigation Light, NEW 2 Micron Fuel/Water Separator, S/S Pull Up Cleat Midship 2 Each.

Click On Photo To Make Larger

The 2300 PureBay has been created using the experience gained from multiple generations of boat building experience coupled with the detailed feedback of today’s anglers.

The 2300 Pure Bay is the result of cutting edge research, development and engineering. The Kevlar reinforced stepped hull is designed to introduce aerated water to the running surface. This cushion of air occurs behind the step which reduces the hulls surface contact and friction. This reduction in friction leads to not only increased overall performance but also increase full economy.
The front fishing platform has multiple storage boxes that are insulated and drain overboard using 1 drains, an over engineered insulated box, appropriately named PermaCooler. The PermaCooler can be used as a cooler or fish box and has the high density insulation, design and structural integrity that rivals some of the high end cooler brands. There are also 2 rod boxes that hold over 5 rods per and an anchor storage box that also drains over board.
The rear deck features 2 fold down jump seats with arm rests, 2 large storage boxes and a catch and release live well with our exclusive Pro Series drain, recirculating pump and pro air system.
The 2300 Pure Bas construction utilizes the newest, state of the art materials and manufacturing processes backed by Blue Wave Boats limited lifetime warranty.

2300 Pure Bay Specifications

LENGTH   22′ 8″

BEAM     102″ or 8′ 6″

DRAFT     13″

WEIGHT (APPROXIMATE)     2,200 LBS.

 MAX WEIGHT    1,200 LBS.

MAX H.P.     300

FUEL CAPACITY     78 GALLONS

MAXIMUM LOAD     8 Persons or 1,200 LBS.

Hull

  • 100% Hand Laid Hull Laminate Process Used Throughout
  • High Quality Marine Grade Color Enhanced HD Gelcoats
  • Solid Fiberglass Rod Reinforced Chines
  • Sound Dampening Core Reinforced Sides
  • Molded Reverse Angle Anti Spray Chines
  • High Speed Lifting Strake Design
  • Transitional Deadrise Design Gives Maximum Performance and Shallow Draft
  • Performance Enhancing Engineered Pocket Tunnel
  • Full V Design for Comfort and Performance Capabilities

Transom

  • All Composite High Density Light Weight Coosa Transom w/ Fiberglass Reinforcement

Interior

  • Molded Trolling Motor Platform
  • Anchor Storage (Drained Overboard)
  • 2 Forward Insulated Fish Boxes (Drained Overboard)
  • 2 Forward Lockable Rod Storage Boxes
  • Floor Wet Storage Box w/ Large Open Storage
  • Front Storage Fish Box Molded Lower to Allow for Easy Step onto Deck
  • Large Forward Casing Deck w/ Lockable Storage
  • Wide Walk Around Gunnel
  • Insulated Rear Catch & Release Livewell
  • 3″ Pro Series Drain in Livewell
  • 2 Rear Compartments with Finished Storage
  • 2 Rear Molded Flip Seats w/ Tackle Trays Underneath
  • Large Working Access to Finished Bilge
  • Large Rear Casting Deck with NO SPLASHWELL – Totally Usable Space
  • Light Weight Closed Molded Finished Lids with Dry Seal Gaskets
  • In-Line Scuppers on Cockpit Drain Hoses
  • Recessed Floor Drains Allow all Water to Drain from Floor
  • Full Transom Design to Enhance Performance and Maximize Rear Deck Space
  • Dry Floor Drain System (Center Cavity w/ Bilge Pump to Allow Customer to Drain Water Off the Floor Using a Pump)
  • Forward Lockable Rod Storage Box
  • Exclusive Non Glare Wave Grip Non-Skid w/ Easy Clean Feature

Other

  • All Composite Construction
  • Virtually Unsinkable Foam Flotation
  • 75 Gallon Fuel Tank (Below Floor) EPA Compliant Fuel Systems
  • Integrated Fuel Tank Access Door Built In
  • Trolling Motor Pre-Wiring (Ran to Console) and w/ Trolling Motor Plug & Panel
  • Battery Mounting Location Molded into Bilge (Doesn’t Take Up Any Storage Compartments)
  • Saltwater Resistant Switch Panel w/ Easy Access Circuit Breakers
  • Deutsche Electrical Connections (Saltwater Resistant)

Hardware

  • All Stainless Steel Fasteners used Throughout (Life Time Warranty)
  • Stainless Steel Compression Latches
  • Stainless Steel Stylish Steering Wheel with Easy Turn Knob
  • Stainless Steel Thru – Hull Fittings
  • Nylon Washers to Help Prevent Corrosion 
  • Shut Off Ball Valve on Aerator Inlets for Easy Pump Changes on the Water
  • Stainless Steel Gunwale Rubrail
  • Stainless Steel 1/2″ Bow & Stern Eyes
  • Stainless Steel Pull-up Cleats
  • 5 Stainless Steel Pull-up Cleats
  • Clear Plano Tackle Boxes Under Back Flipseats
  • Stainless Steel Cup Holders
  • 3-S/S Cupholders
  • Side Wall Recessed Roholders
  • Bow Trim/Trolling Motor Plug Panel
  • Auto Bilge
  • High Speed Aerator Water Pickup
  • Stainless Steel Gas Fill

Comfort Features

  • Liner Finished Storage Boxes & Livewells Throughout
  • Removable Rear Bench Seat and Slide in Backrest
  • Exclusive 3″ PRO SERIES Live Well Drain in Console
  • Dual Battery Shut Off Switch
  • Tilt Hydraulic Sea Star Steering System
  • Lenco Trim Tabs
  • 10 Blue LED Interior Lighting
  • 2 Rear FlipSeats with Full Back Pad Support and Exclusive Fold Down Armrests
  • Marine Grade Vinyl and Foam Upholstery made with Double Stitching
  • RSD Cockpit Drains (Remote Self Drain)
  • 1 1/2″ Front Livewell Drain
  • 1 1/2″ Fishbox Drains
  • 1 1/2″ Livewell Overflow Drain
  • Livewell with rounded corners, recessed overflow, false magnetic wall and flush fittings

Custom Helm Features

  • Marine Grade Horn with Stainless Grill
  • Stylish Console Design w/ Comfortable Angled Footrest Molded In
  • 6 Stainless Steel Flush Mounted Rodholders
  • Removable Windscreen
  • 12 Volt Receptacle
  • Exclusive Chrome Wave Pattern Switching w/ Blue Indicator Lighting
  • Large Open Dash Space Design for Flush Mount Accessories
  • 2 Molded Catch – All Trays
  • Oval Baitwell
  • Cushioned Seat and Leanback Pad

Stringer

  • Multi Directional Engineered All Composite Stringer System
  • Achieves an Unbeatable 360* Bond Around Entire Perimeter
  • Creates 4 – Lateral Stringer Supports versus Competitions 2
  • Attaches and Gives Full Width Bond and Support Across Entire Transom and up Sidewall
  • Double Level Gussets Supports the Load Weight of the Engine at Key Structural Points
  • Using Plexus “Fiberglass Fusion” Methacrylates Insure 2 Surfaces Become 1 During Bonding
  • 100% Marine Grade Closed Cell Foam Filled
  • Over Sized Lateral and Horizontal Stringers allow for Large Amounts of Bonding Surface and Support

Hardware

  • Stainless Steel Pull-up Cleats
  • 3/4″ Polished Seat Base
  • Atlas 12″ Hydraulic Jackplate
  • Gunnel Mounted Rod & Cup Holders
  • Stainless Steel Hydraulic Cylinder On 5 Large Lids
  • Blue LED Underwater Lights
  • LED Navigation Lights in Stainless Rubrail
  • Friction Hinges

Console

  • Breakaway Aluminum T-Top
  • Glove Box w/ Clear Lid
  • Console Front Storage Center Fold out (tall console only)
  • Acrylic Dash w/ LED Push Buttons
  • Riser for Helm Station 18″
  • Privacy Console
  • Tournament “T” Console – Tall Console Without Front Livewell
  • Privacy Console – Allows room for a porti potti and extra storage
  • Clear Vision “See Through” Console Livewell

Driver Station

  • Tackle Tray Under Leaning Post Seat
  • Leaning Post Baitwell
  • Leaning Post Backrest Slide In
  • 70 Alum Leaning Post w/ Foot Rest, Rodholders, and 70 Qt. Ice Chest
  • 100 Alum Leaning Post w/ Foot Rest, Rodholders, and 100 Qt. Ice Chest
  • 70 Alum Leaning Post w/ Welded Backrest, Double Foot Rest, Rodholders, and 70 Qt. Ice Chest
  • 100 Alum Leaning Post w/ Welded Backrest, Foot Rest, Rodholders, and 100 Qt. Ice Chest

Other

  • Fold Down Centric II Fishing Chair
  • Custom Boat Colors
  • Hamby Keel Protector
  • Boat Cover
  • Blue LED Cup Holders
  • Pro Series Graphics
  • 10′ Blade Power Pole w/ Mounting Bracket
  • Powder Coating Package (white or Black)
  • Blackout Interior Package
  • 10 Micron Fuel Water Separator
  • Storage Tackle Tub Drop in for Bilge Area Lid Opening
  • Floor Storage Plumbed w/ Overboard Drain
  • Bow Seat Cushions w/ Leanback
  • Garmin 7610 Flush Mounted
  • Garmin 7607XSV Flush Mounted

Photo’s Coming Soon!